It’s not just unsightly. Unhandled custom cabinets grand junction can harbor germs and food crumbs can hide in the back corners. Wood is porous and can stick to anything. However, it’s better than metal or laminate.
This step-by-step guide will help you clean your kitchen cabinets.
Step 1: Take them out
- It’s possible to do a staggered cabinet cleaning instead of trying to clean it all at once. You’ll need to temporarily store the contents on countertops.
- When cabinets are empty, remove and dispose of past-its-prime shelf papers if needed.
- Dust and crumbs can be removed from shelves and drawers by vacuuming or wiping them clean.
Step 2 – Take care of the tops
- Spray the surface with white vinegar and sprinkle some baking soda on top. Give it a few minutes to dry.
- Use a sponge to scrub the area. Next, use a sharp edge like a credit card to scrape the surface. Finally, wipe off any gunk using a towel or a rag.
- Spray the product again and dry with a damp cloth.
Step 3 – Mix up a gentle cleaner
Your goal is to clean your cabinets, not damage them.
- Use a few drops of mild dish soap in warm water to clean painted or finished wood. This will remove dirt, grease, and smudges. To give it some extra oomph, you can add white vinegar. It has antibacterial properties.
- Use: Mix the ingredients in a spray bottle. However, you should apply it onto a microfiber cloth, sponge, or directly on the cabinet surface. It’s best not to soak the wood.
Step 4 – Clean high to low
- Begin with the tops, then work your way down. Interiors should be done first, starting with the back wall and moving on to the sides. Next, are the shelves, drawers, and sides. Make sure to pay extra attention to the corners. Spray the cleaning solution onto a toothbrush, and scrub gently if necessary.
- To remove soap residue, use a sponge or cloth lightly moistened in plain water. After rinsing thoroughly, dry the cabinet and then seal it.
- Clear the sides of the boxes, and then clean the drawer fronts/doors.
Step 5 – Go to the grease
A mild abrasive mixture of one-part baking powder and two-part warm water can be used to remove yellowish grease.
- Use the grease to coat your skin. Let it sit for a few minutes and then scrub with a soft bristle brush. Use a soft-bristled toothbrush.
- Use a damp rag, sponge, or microfiber cloth to rinse the water out. Dry the area with a dry towel.
Step 6 – Treat the trim
Dirt and grease love crevices so they settle in cabinet trim. The more elaborate the trim, the worse it will get.
- Use a gentle toothbrush or a cloth to gently clean your skin.
- Use plain water to rinse the cloth.
Step 7 – Handle hinges right
Take care of the metal parts of cabinets.
- To clean your hinges, wrap a damp cloth around your index finger. Spray a mixture of 50/50 water and white vinegar on an old toothbrush to remove stubborn grease. Dry it.
- Use the toothbrush method to clean ceramic or metal hardware. The areas around knobs and handles can collect grease and grime.
Step 8 – Make the glass shine
- Use a commercial glass cleaner if you have glass-fronted cabinet doors. You can also use a homemade spray solution of 1 cup of rubbing alcohol, 1 cup of water, and 1 tablespoon of white vinegar to clean the inner and outer panes.
Step 9 – Clean the contents
- Before you fill shelves or drawers, make sure to inspect cookware, food packages, and other items. To ensure that these items aren’t dirty or dusty, Even if everything appears to be in perfect condition, you can give the contents a quick wipe with a microfiber cloth.
